-
-
Turn the purple button clockwise to open the pump manifold box.
-
There is a section of the salt water pipeline that is used for pumping water and has a thicker diameter.
-
There are two raised rubber rings on both sides
-
After tightening the water pipe slightly, clamp the raised rubber rings on both ends of the pump pipe box.
-
Turn the purple knob counterclockwise to close the pump pipe box, making sure that the pipe is not clamped and cannot be closed.
-
-
-
After tightening, try to step on the pedal to confirm whether water can flow out.
-
If you have turned the tube to close it after the test to prevent saline from leaking, remember to open it again before the operation.
-
Almost done!
Finish Line
